- 产品
- 应用
- 公司
- 新闻/事件
- 资料下载
- 联系我们
AUTO DRAFT – automatic calculation of the perfect break draft
OPTI SET – optimal main drafting point due to self-optimization
Self-adjusting lap monitoring for reliable detection of fiber laps
Autoleveller Draw Frame TD 10
A building block in the Smart Factory
Self-optimizing features are the key in the world of tomorrow, where high operator fluctuation is already a reality, and with it a loss of important quality know-how.
Always in control with Trützschler's new mill monitoring system “My Mill”, the all-in-one platform for spinning.
The quality filter in the spinning mill
The high-precision levelling of the draw frame sliver in the last draw frame passage is decisive for the quality of the subsequent yarn. For this reason, Trützschler has further optimized levelling in the new draw frame model TD 10 and thus once again set a benchmark in draw frame technology.
In combination with the mill monitoring system “My Mill”, the quality sensors DISC MONITOR and DISC LEVELLER, which are checking every metre of draw frame sliver, are the building block of a Smart Factory.
The optimized DISC LEVELLER with new quick release fastener and drive technology SERVO DRAFT are the heart of the autoleveller draw frame.
A better overview of draw frames with T-LED
The operator can read the operating status of the machines or quality parameters at a glance from the T-LED remote display over large distances.
The suction elements are individually simulated to optimize flow and are made of robust plastic.
Economic efficiency calculation
1,000 kg/h per draw frame set, energy costs 0.13 $/kWh
1,000 kg/h per draw frame set, energy costs 0.13 $/kWh
The world’s most energy efficient suction system
If the draw frames are connected to a central filter system, enormous savings potentials can be realized here as well. Due to the flow-optimized suction ducts, the TD 10 requires only a volume flow of 840 m³/h at a pressure of merely -430 Pa. This results in a significantly reduced filter load and thus in significantly lower energy costs. Savings can also be realized to the same extent on the breaker draw frames.
The new compactness
Because length matters
The length of the draw frames is decisive for the length of the building and thus also for the investment and operating costs. This is why the TD 10 is optimized for compactness: The new design made it possible to shorten the machine by 335 mm.
[Translate to CN:] Die neue TD 10 ist 14,2 % kürzer als das Vorgängermodell TD 8.
Space savings of more than 20 %
Compared to the competition, the space saved by the clever design of the TD 10, averaged over all can heights, is more than 20 %.
This means that a spinning mill with a draw frame production of 1,000 kg/h can achieve savings in building investment of up to $ 14,500.
The diagram shows the space savings compared to the competition.
The TD 10C is characterized by minimum centre distance. Any number of machines can be combined with full utilization of the efficiency of the individual machines.
TD 10C „Compact“
The Trützschler double head concept stands for separate drives and maximum efficiency. For autoleveller draw frames there is therefore the COMPACT installation of the TD 10 with the advantages of a double head draw frame regarding space requirements and independence from individual machines in terms of production output.